Bazooka CSA-2 Owner's Manual
Connect the remote terminal of the amplifier to a switchable +12V source.
This connection allows the amplifier to be turned on and off with the power control of the radio or CSS-3I. If
the radio has a REMOTE output terminal, connect it to the amplifier's terminal marked “TURN-ON” (using a 16
gauge wire or heavier). Now when the radio or CSS-3I is turned on, the amplifier will automatically turn on.
the radio has a REMOTE output terminal, connect it to the amplifier's terminal marked “TURN-ON” (using a 16
gauge wire or heavier). Now when the radio or CSS-3I is turned on, the amplifier will automatically turn on.
94.7
94.7
RADIO'S REMOTE
TURN-ON OUTPUT
REMOTE TURN ON WIRE
SINGLE AMPLIFIER/SOURCE CONNECTION
SINGLE AMPLIFIER/SOURCE CONNECTION
BLUE WIRE
FROM SPEAKER OUTPUT
WIRE HARNESS
HIGH LEVEL INPUT
FILTER
HPF/FULL
REMOTE
SPEAKER OUTPUT
BAZOOKA
BAZOOKA
RADIO'S REMOTE
TURN-ON OUTPUT
BLUE WIRE FROM CSA-2’S
SPEAKER OUTPUT
WIRE HARNESS
ORANGE WIRE
FROM CSS-3I’S
WIRE HARNESS
BLUE WIRE
FROM CSS-3I’S
WIRE HARNESS
HIGH LEVEL INPUT
FILTER
HPF/FULL
REMOTE
SPEAKER OUTPUT
BAZOOKA
BAZOOKA
REMOTE TURN ON WIRE
CSS-3I CONNECTION
CSS-3I CONNECTION
Input A
Status
RJ-45
Power
R
3.5mm
L
Input B
R
L
Level A
Level B
L
R
L
R
Output to Amp
Thru-put A
CSS-3I
Audio Input Control System
Thru-put B
L
R
Stereo Input
7