Alpine CDE-W265BT Owner's Manual
9
-EN
CDE-W265BT
CDE-164BT
Accessory List
• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone ..............................................................................1
• Mounting Sleeve ......................................................................1
• Carrying Case
• Power Cable ..............................................................................1
• Microphone ..............................................................................1
• Mounting Sleeve ......................................................................1
• Carrying Case
*
..........................................................................1
• Bracket Key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set
* Only for CDE-164BT.
Turning Power On and Off
Press
t to turn on the unit.
Note
• The unit can be turned on by pressing any other button except and
• The unit can be turned on by pressing any other button except and
e
*
(Release).
* Only for CDE-164BT.
Press and hold
t for at least 2 seconds to turn off the
unit.
Note
• The first time power is turned on, the volume will start from level 0.
• The first time power is turned on, the volume will start from level 0.
Demonstration Function
This unit will enter a demonstration mode to display its various
functions. When Demo mode is set to ON (initial setting), the unit starts
the demonstration if there is no operation for 30 seconds.
functions. When Demo mode is set to ON (initial setting), the unit starts
the demonstration if there is no operation for 30 seconds.
There are two methods to close the demonstration mode.
Method 1:
When installing this unit in a car for the first time, the DEMO OFF screen
will be displayed for 20 seconds after turning on the unit. Press
ENTER within 20 seconds to put the demonstration mode into
STANDBY
will be displayed for 20 seconds after turning on the unit. Press
ENTER within 20 seconds to put the demonstration mode into
STANDBY
*
.
Method 2:
Setting DEMO MODE to STANDBY
*
or OFF
*
.
* For details about STANDBY and OFF, please refer to “Demonstration”
Source Selection
Press
VSOURCE to change the source.
TUNER SIRIUS XM
*1
DISC USB AUDIO/iPod
*2
BT AUDIO
*3
PANDORA
*4
AUXILIARY
*5
TUNER
*1 Displayed only when a SiriusXM Tuner is connected.
*2 Displayed only when the iPod/iPhone is connected.
*3 Displayed only when BT IN is set to ON, refer to “Setting the
*4 Not displayed when ALPINE APP is set to OFF, refer to “Setting
Detaching and Attaching the Front Panel
(Only for CDE-164BT)
(Only for CDE-164BT)
Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
Getting Started
/SOURCE
/DIM.
/SETUP
/
/ENTER
Rotary encoder
/
/ENTER
/SETUP
/SOURCE
/DIM.
Rotary encoder
Turning the Demonstration mode Off
Detaching