Sony WX-GS920BH Owner's Manual
8
GB
When connecting a BLUETOOTH device for the first
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other. This unit can connect two
BLUETOOTH devices (two cellular phones, or a
cellular phone and an audio device).
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other. This unit can connect two
BLUETOOTH devices (two cellular phones, or a
cellular phone and an audio device).
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press MENU, rotate the control dial to
select [BLUETOOTH], then press it.
select [BLUETOOTH], then press it.
3
Rotate the control dial to select
[PAIRING], then press it.
[PAIRING], then press it.
4
Rotate the control dial to select
[DEVICE 1]* or [DEVICE 2]*, then press it.
[DEVICE 1]* or [DEVICE 2]*, then press it.
flashes while the unit is in pairing standby
mode.
* [DEVICE 1] or [DEVICE 2] will be changed to the
paired device name after pairing is complete.
5
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
6
Select [WX-GS920BH] shown in the
display of the BLUETOOTH device.
display of the BLUETOOTH device.
If your model name does not appear, repeat
from step 2.
from step 2.
7
If passkey* input is required on the
BLUETOOTH device, input [0000].
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc., depending on
the device.
the device.
When pairing is made,
stays lit.
8
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
to establish the BLUETOOTH connection.
or
lights up when the connection is made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To start playback
For details, see “Playing a BLUETOOTH Device”
(page 13).
(page 13).
To disconnect the paired device
Perform steps 2 to 4 to disconnect after this unit
and the BLUETOOTH device are paired.
and the BLUETOOTH device are paired.
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
required. Some paired devices will connect
automatically.
1
Press MENU, rotate the control dial to
select [BLUETOOTH], then press it.
select [BLUETOOTH], then press it.
2
Rotate the control dial to select [BT
SIGNAL], then press it.
SIGNAL], then press it.
Make sure that
lights up.
3
Activate the BLUETOOTH function on the
BLUETOOTH device.
BLUETOOTH device.
4
Operate the BLUETOOTH device to
connect to this unit.
connect to this unit.
or
lights up.
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device
WX-GS920BH
Connecting with a paired BLUETOOTH
device
device
[0000]
Input passkey