Kicker 42PXA2001 Owner's Manual
3
12V
12V
Model
External Fuse
PXA200.1
1 x 15 Ampere
PXA500.1
1 x 45 Ampere
battery
external fuse
(15A)
(15A)
external fuse
(45A)
(45A)
remote
turn-on
turn-on
remote turn-on
speaker outputs
speaker outputs
+
+
-
-
RCA inputs
(remove to use
hi-level input)
(remove to use
hi-level input)
bare-metal chassis ground
bare-metal chassis ground
bare-metal
chassis
ground
chassis
ground
insert power and
ground terminal
adapter
ground terminal
adapter
bare-metal
chassis ground
chassis ground
≤18”
(45cm)
≤18”
(45cm)
≤24”
(60cm)
≤24”
(60cm)
Cut the looped red power cable located on the PXA harness and install a 15A (PXA200.1) or 45A (PXA500.1)
fuse. Fuse installation should be within 18” (45cm) of the battery and in-line with the harness’ power cable, which
is connected to your amplifi er. If you ever need to remove the amplifi er from the vehicle after it has been installed,
the ground wire should be the last wire disconnected from the amplifi er--just the opposite as when you installed it.
fuse. Fuse installation should be within 18” (45cm) of the battery and in-line with the harness’ power cable, which
is connected to your amplifi er. If you ever need to remove the amplifi er from the vehicle after it has been installed,
the ground wire should be the last wire disconnected from the amplifi er--just the opposite as when you installed it.
PXA200.1
PXA500.1
KICKER KISL (optional)
from source unit high-level speaker outputs
to amplifi er
PXA500.1:
Use 8 gauge wire if the
power wire is greater than 10 feet in
length; 10 gauge if less.
length; 10 gauge if less.
2015 PX Mono Amplifiers Rev D.indd 3
8/26/2014 3:42:37 PM