Infinity Kappa K2 Owner's Manual
CHAPTER 3: REMOTE CONTROLLER (Controls and Indicators)
20. Phone Call button and 21. Phone End button:
Call status
Press Phone Call button to…
Press Phone End button to…
Outgoing call is ringing
N/A
Cancel the outgoing call
Incoming call is ringing
Answer the call
Reject the call
Call is active
Transfer the call audio to the phone for
private conversation
private conversation
Hang up the call
Call waiting: a second incoming call is
ringing
ringing
Put the active call on hold and answer
the incoming second call
the incoming second call
Reject the incoming second call
Call waiting: first call is active, second
call is on hold
call is on hold
Put the current call on hold and switch
to the second call
to the second call
Hang up the current call and switch to
the second call
the second call
NOTE: Call waiting statuses only apply to one connected phone handling two incoming calls. You cannot use Bluetooth to answer or switch
between calls from two connected phones.
between calls from two connected phones.
22. Power/Protect indicator:
The light will illuminate in white when the amp is receiving power and playing. The indicator will turn red if the amp enters Protect mode as a
result of conditions such as DC Output, over/under voltage, amplifier output circuit failure, excessive heat, and will shut itself down.
result of conditions such as DC Output, over/under voltage, amplifier output circuit failure, excessive heat, and will shut itself down.
23. Clari-Fi indicator:
This light will illuminate when Clari-fi is engaged.
24. Party Mode indicator:
The light will illuminate when Party Mode has been engaged (see 26. Party Mode button).
25. Bluetooth indicator:
The light will illuminate when Bluetooth is active and the amp is paired with a compatible device. (See 28. Bluetooth Pairing button).
20 22 23 24 25 26
21
29
27
28
9