Kicker 42PXA3004 Owner's Manual
3
12V
Model
External Fuse
PXA300.4
1 x 40 Ampere
battery
external fuse
(40A)
(40A)
remote turn-on
speaker outputs
+
-
RCA inputs
(remove to use hi-level input)
(remove to use hi-level input)
bare-metal
chassis ground
chassis ground
bare-metal chassis ground
insert power and
ground terminal
adapter
ground terminal
adapter
≤18”
(45cm)
≤24”
(60cm)
Cut the looped red power cable located on the PXA harness and install a 40A fuse. Fuse installation should be
within 18” (45cm) of the battery and in-line with the harness’ power cable, which is connected to your amplifi er.
If you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be
the last wire disconnected from the amplifi er--just the opposite as when you installed it. Use 8 gauge wire if the
power wire is greater than 10 feet in length; 10 gauge if less.
within 18” (45cm) of the battery and in-line with the harness’ power cable, which is connected to your amplifi er.
If you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be
the last wire disconnected from the amplifi er--just the opposite as when you installed it. Use 8 gauge wire if the
power wire is greater than 10 feet in length; 10 gauge if less.
KICKER KISL (optional)
from source unit high-level speaker outputs
to amplifi er
2015 PX 4-Chan Amplifier Rev F.indd 3
11/4/2014 3:16:01 PM