Wet Sounds SD6 Owner's Manual

Remote Level Control

The remote level control gives you the ability to control 

the level remotely.  You may install the level control by the 

driver for easy adjustments on the fly.  The Wet Sounds 

remote level control is not a bass boost control.  Or a 

remote gain.  It is a remote level control.  Meaning if the 

amplifiers gain is set at half.  The remote level allows you 

to turn the amplifier up remotely from zero to half.  If the 

amp is set at ¼.  The remote level will go from zero to ¼. 

This allows the system to be set at the best sounding 

level and just use the remote to turn it down when 

needed.  This is a safety feature that also keeps people 

from turning your system up too high and damaging 

equipment

Fuses

Each Sinister amp has Four 30 amp fuses. The Sinister amplifiers are one 

of the most efficient amplifiers in the world. However, the laws of physics 

apply and you need power to make power and the Sinister amps make a 

LOT of power.  If you blow a fuse. Check your wiring for shorts and why the 

fuse is blowing.  Also, check the speakers and speaker wiring as well. You 

should trouble shoot the system before replacing fuses.

RCA Input

The Sinister amplifiers have fully balanced RCA inputs for the best sound 

quality and lowest noise.  They are labeled for easy installation and being 

a universal amplifier. Any channel can serve any purpose.  High Pass/Low 

Pass/Full Range. Also, please note.  Bass Boost is available on chs 1-2.  

So if using a subwoofer and you would like to use Bass Boost. The 

subwoofer will be on chs 1-2. Bass Boost can be passed to the other 

channels if you are using the input source selection switch.

8

FEATURES

9

REMOTE

LEVEL

FUSE 30 AMP X 4

SD2

SD4

SD6