Audiovox AVX10USB Owner's Manual

Page of 28
26
PROBLEM
SOLUTION
IR remote inoperative
t Verify that the battery in the remote is fresh.
t Verify that the remote sensor eye is not obstructed.
Disc won't play
t Insert a disc with the label side facing the viewer.
t Check the type of disc you put into disc tray. This DVD only plays 
DVD, audio CD and MP3s.
t Both the unit and the disc are coded by region. If the regional 
codes don’t match, the disc can’t be played.
Play starts, but then stops  
immediately
t The disc is dirty. Clean it.
t Condensation has formed. Allow player to dry out.
No sound or distorted 
sound
t Make sure your DVD is connected properly. Make sure all cables 
are securely inserted into the appropriate jacks.
t If you are using the 2-channel IR headphones, make sure you 
turn on the IR headphone power, make sure the correct channel 
"PS# JTTFMFDUFE
t If the FM Modulator is ON make sure proper frequency has been 
selected. 
Cannot advance through a 
movie
t Most discs prohibit advancing through the opening credits and 
warning information that appear at the beginning of movies.
The icon 
BQQFBST
t The feature or action cannot be completed at this time 
because: 
 1. The disc’s software restricts it. 
5IFEJTDTTPGUXBSFEPFTOUTVQQPSUUIFGFBUVSF FH BOHMFT  
 3. The feature is not available at the moment. 
 4. A title or chapter number that is out of range has  
    been requested.
Picture is distorted
t The disc might be damaged. Try another disc.
t It is normal for some distortion to appear during forward or 
reverse scan.
   Troubleshooting