Audiovox Voxx MTG13UHD Owner's Manual
8
Installing the Unit In A Vehicle
1.
#2 Phillips Screwdriver
2.
#1 Phillips Screwdriver
3.
Utility or Razor Knife
4. Wire
Strippers
5.
Upholstery hook tool (for removal of panels as necessary)
6. Electrical
Tape
7. Masking
Tape
8.
Multimeter to verify 12 volt DC and continuity (Do not use a test light or logic probe)
9.
Marker pen – to mark headliner, to mark trim ring if used
10. Scribe (to mark trim ring if used)
11. Miscellaneous:
t Electrical Connectors (to connect to vehicle power source, requirements will vary
from vehicle to vehicle)
t DVD Disc, USB Content and HDMI device (to verify system operation after
installation)
Tools Required
Preparation
Place the unit on a soft surface to avoid damaging the plastic.
Installing the Snap On Covers
The Unit is supplied with black, shale and pewter plastics to allow for a custom
installation. Choose the desired color and install as follows.
installation. Choose the desired color and install as follows.
Snap On Cover (Shroud)
1 Pewter, 1 Shale, 1 Black
Housing
1.
2.
3.
Snap On Cover
(Screen Back Cabinet)
1 Pewter, 1 Shale, 1 Black
4.
Pry Tool
5.
Slide Knob