DJI Phantom 3 4K Owner's Manual

Aircraft

Phantom 3 4K User Manual

Vision Positioning System

The DJI Vision Positioning System uses ultrasound and image data to help the aircraft maintain its current
position. With the help of Vision Positioning, your Phantom 3 4K can hover in place more precisely and ﬂy
indoors or in other environments where a GPS signal is not available. The main components of the Vision
Positioning System are located on the bottom of your Phantom 3 4K; they include [2] two ultrasonic
sensors and [1] one monocular camera.

[1]
[2]

20 m

If the aircraft is flying under 20 meters (65 feet) and Failsafe (including

Smart RTH, Lower Battery RTH ) is triggered, the aircraft will first

automatically ascend to 20 meters (65 feet) from the current altitude.

You can only cancel the ascending by exiting the Failsafe. Refer to “RTH

Button” on page 26 for more information on how to exit the Failsafe and

regain the control of the remote controller.

20 m

Aircraft automatically descends and lands if RTH is triggered when the

aircraft flies within a 20 meters (65 feet) radius of the Home Point. Aircraft

will stop ascending and immediately return to the Home Point if you move

the throttle stick if the aircraft reaches 20 meters (65 feet) altitudes or

beyond during Failsafe.

20米

Aircraft cannot return to the Home Point when GPS signal is weak
( [

] displays grey) or unavailable.

20米

if you move the throttle stick after the aircraft rises above 65 feet

(20m) but below the pre-set Failsafe RTH altitude, the aircraft will stop

ascending and immediately return to the Home Point.

Using Vision Positioning

Vision Positioning is activated automatically when the Phantom 3 4K is turned on. No further action

is required. Vision Positioning is typically used in indoor environments, where GPS is unavailable.

Using the sensors that are built into the Vision Positioning system, the Phantom 3 4K can hover

precisely even without GPS.