Parrot Disco FPV Owner's Manual
CONNECTING
TO THE PARROT DISCO
TO THE PARROT DISCO
CONNECTING THE PARROT
SKYCONTROLLER 2 TO THE PARROT DISCO
SKYCONTROLLER 2 TO THE PARROT DISCO
1.
Place the Parrot Disco on a flat surface.
2.
Press the Parrot Disco’s On/Off button.
> The button flashes red and green once the GPS is connected.
3.
Press the Parrot Skycontroller 2’s On/Off button to turn it on.
4.
Wait until the warning light is a steady green.
You are connected to the Parrot Disco.
If the warning light continues to flash red, you need to calibrate the
Parrot Disco. To do this:
Parrot Disco. To do this:
1.
In the FreeFlight Pro application, go to Fly and film >
>
Position and press Calibrate.
2.
Rotate the Parrot Disco on the
Z-axis (yaw).
Z-axis (yaw).
3.
Rotate the Parrot Disco on the
Y-axis (pitch).
Y-axis (pitch).
4.
Rotate the Parrot Disco on the
X-axis (roll).
X-axis (roll).
> The warning light flashes
green. The Parrot Disco is
calibrated.
calibrated.
Z
Y
X