Kicker Klock Werks® FKAVV09 FIT KIT Owner's Manual
3
12V
Model
External Fuse
PXA200.2
1 x 15 Ampere
battery
external fuse
(15A)
(15A)
remote
turn-on
turn-on
speaker outputs
+
+
-
-
RCA inputs
(remove to use
hi-level input)
(remove to use
hi-level input)
bare-metal chassis
ground
ground
bare-metal chassis ground
≤18”
(45cm)
≤24”
(60cm)
Cut the looped red power cable located on the PXA harness and install a 15A fuse. Fuse installation should be
within 18” (45cm) of the battery and in-line with the harness’ power cable, which is connected to your amplifi er. If
you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the
last wire disconnected from the amplifi er--just the opposite as when you installed it.
within 18” (45cm) of the battery and in-line with the harness’ power cable, which is connected to your amplifi er. If
you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the
last wire disconnected from the amplifi er--just the opposite as when you installed it.
KICKER KISL (optional)
from source unit high-level speaker outputs
to amplifi er
2015 PX Stereo Amplifier Rev B.indd 3
8/26/2014 3:26:45 PM