Crown XTI 4002 Owner's Manual

Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4 V.

Frequency Response (at 1 watt into 4 ohms, 20 Hz to 20 kHz): +0 dB, –1 dB.

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 100 dB (103 dB in XTi 6000).

Damping Factor (8 ohm) 10 Hz to 400 Hz: > 500.

Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB.

Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.

Input Stage: Input is electronically balanced and employs pre cision 1% resistors.

XTi 1002: 6.8A, XTi 2002: 8.3A, XTi 4002: 10.5A; at idle draws no more than 30 watts. 
XTi 6002: 15.3A; at idle draws no more than 180 watts.

Voltage Gain (at 1 kHz, 8 ohm rated output): XTi 1002: 30.5 dB. XTi 2002: 32.9 dB. XTi 4002: 34.2 dB.  

XTi 6002: 37.1 dB.

Maximum Imput Signal: +22 dBu typical.

Stereo: 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions). 
Bridge-Mono: 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions).

AC Line Voltage and Frequency Configura tions Available (± 10%): 100V, 120V, 220-240V  50/60 Hz.

Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).

Ventilation: Flow-through ventilation from front to back.

Cooling: Heat sinks and proportional-speed fan.

Dimensions. Width, Height, Depth (behind mounting surface): 

EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D. XTi 6000 is 16.2 in. (41.15 cm) D.

Net Weight, Shipping Weight: 18.5 lb (8.4 kg), 21.5 lb (9.8 kg). XTi 6002 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg).

 
Stereo, 2 ohms (per channel)

Stereo, 4 ohms (per channel)

Stereo, 8 ohms (per channel)

Bridge-Mono, 4 ohms

Bridge-Mono, 8 ohms

 

700W

500W

275W

1,400W

1,000W

 

1,000W

800W

475W

2,000W

1,600W

 

1,600W

1,200W

650W

3,200W

2,400W

 

3,000W

2,100W

1,200W

6,000W

4,200W

   With 0.5% THD.  

With 1% THD.  

 Not rated for 100V versions.

*

†

*

†

*

*

*

*

*

*