Sony STR-DN1080 Owner's Manual

20

GB

Connecting Speakers

This receiver allows you to connect up to 7.1-channel system.
The speaker layout diagram is a guide for the ideal speaker placement. You do not need to adjust 
your speaker placement exactly the same as the diagram.



Before connecting cables, be sure to disconnect the AC power cord (mains lead).



Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are 
not touching each other between the SPEAKERS terminals.



When you connect a subwoofer with an auto standby function, turn off the function when watching movies. 
If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input 
signal to the subwoofer, and the sound may not be output.



If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks.

Be sure to connect the speaker cables correctly to the terminals of the speaker and this receiver.
Also, be sure to tightly twist the speaker wire strands and insert them securely into the speaker 
terminals.



Be sure not remove too much of the speaker cable sleeves, so as to prevent the wires of the speaker cables 
from touching each other.



Connect speaker cables properly with the polarities (+/–) matched between the receiver and the speakers.



Improper connection may result in fatal damage to the receiver.

10mm

(13/32 in)