Sony STR-DN1080 Owner's Manual

40

GB

Setting up the Receiver 
using the Easy Setup

To perform initial setup of the receiver, make 
sure a TV is connected to the receiver 
(page 29). Then, switch the input of the TV to 
the input to which the receiver is connected.

It is not possible to perform the Easy Setup 
procedure using the indications on the front display 
panel.

When you turn on the receiver for the first 
time or after the receiver is initialized, the 
Easy Setup screen appears on the TV screen.
Follow the on-screen instructions to make the 
basic settings using  /

/ /  and 

.

If the Easy Setup screen does not appear or 
you want to display the Easy Setup screen 
manually, you can display it by pressing 
HOME, then select [Setup] – [Easy Setup].

By performing Easy Setup, you can complete:
1: Language selection
2: Speaker settings

Check your speaker system and perform 
Auto Calibration according to the 
configuration and arrangement of your 
speaker system.

3: Internet settings

Select the network connection method and 
configure settings to connect the receiver 
to the network.



Disconnect the headphones.



Remove any obstacles between the 
calibration microphone and the speakers.



Auto Calibration is not available when 
[Bluetooth Mode] is set to [Transmitter].



For accurate measurement, make sure the 
environment is quiet and free from noise.



Set the speaker output to a setting other 
than ”SPK OFF.” See “Selecting the front 
speakers” (page 41).



Confirm the active subwoofer setup
 Before using a subwoofer, turn on the 

subwoofer and turn up the volume. Turn 
the LEVEL to just before the mid-point.

 When a subwoofer with a crossover 

frequency function is connected, set the 
value to maximum.

 When a subwoofer with an auto standby 

function is connected, set it to off 
(deactivated).

Depending on the characteristics of the 
subwoofer you are using, the setup distance 
value may be different from the actual position.

Restarts Easy Setup to configure basic settings. Follow the on-screen instructions.

BACK

What you can do with Easy Setup

Performing Auto Calibration 
(D.C.A.C. EX)