Sony STR-DN1080 Owner's Manual
58
GB
Code 35
The speaker pattern configuration does not
match calibration result. Please check the
speaker pattern and connection.
The speaker pattern configuration does not
match calibration result. Please check the
speaker pattern and connection.
Warning 40
The measurement has been completed, but
the noise level is high. For best results,
calibrate in as quiet a place as possible.
The measurement has been completed, but
the noise level is high. For best results,
calibrate in as quiet a place as possible.
Warning 41, Warning 42
The input signal from the calibration
microphone is too large. The microphone
may be too close to the speakers. Please
place the calibration microphone at your
desired listening position. Please note, when
using the receiver as a pre-amplifier, this
message may appear by mistake. Please
disregard.
The input signal from the calibration
microphone is too large. The microphone
may be too close to the speakers. Please
place the calibration microphone at your
desired listening position. Please note, when
using the receiver as a pre-amplifier, this
message may appear by mistake. Please
disregard.
Warning 43
The distance and phase of the subwoofer
cannot be detected. Please check the
subwoofer and re-calibrate in a quiet
environment.
The distance and phase of the subwoofer
cannot be detected. Please check the
subwoofer and re-calibrate in a quiet
environment.
Warning 44
The measurement has been completed, but
the speaker may need to be re-positioned.
Please see "Installing Speakers" in the Help
Guide.
The measurement has been completed, but
the speaker may need to be re-positioned.
Please see "Installing Speakers" in the Help
Guide.
Precautions
On safety
Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
On power sources
Before operating the receiver, check that
the operating voltage is identical with your
local power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.
the operating voltage is identical with your
local power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.
If you are not going to use the receiver for a
long time, be sure to disconnect the
receiver from the wall outlet. To disconnect
the AC power cord (mains lead), grasp the
plug itself; never pull the cord.
long time, be sure to disconnect the
receiver from the wall outlet. To disconnect
the AC power cord (mains lead), grasp the
plug itself; never pull the cord.
The AC power cord (mains lead) must be
changed only at a qualified service shop.
changed only at a qualified service shop.
On heat buildup
Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
On placement
Place the receiver in a location with
adequate ventilation to prevent heat
buildup and prolong the life of the receiver.
adequate ventilation to prevent heat
buildup and prolong the life of the receiver.
Do not place the receiver near heat sources,
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
Do not place anything on top of the cabinet
that might block the ventilation holes and
cause malfunctions.
that might block the ventilation holes and
cause malfunctions.
Do not place the receiver near device such
as a TV, VCR, or tape deck. (If the receiver is
being used in combination with a TV, VCR,
or tape deck, and is placed too close to that
device, noise may result, and picture quality
may suffer. This is especially likely when
using an indoor antenna (aerial).)
as a TV, VCR, or tape deck. (If the receiver is
being used in combination with a TV, VCR,
or tape deck, and is placed too close to that
device, noise may result, and picture quality
may suffer. This is especially likely when
using an indoor antenna (aerial).)
Use caution when placing the receiver on
surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or
discoloration of the surface may result.
surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or
discoloration of the surface may result.
On operation
Before connecting other device, be sure to
turn off and unplug the receiver.
turn off and unplug the receiver.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.