Yamaha AVENTAGE RX-A670 Owner's Manual
Listening to DAB radio (U.K., Europe, Australia and Russia models)
DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more
stable reception compared to analog signals. The unit can also receive DAB+ (an
upgraded version of DAB) that allows for more stations using MPEG-4 HE-AAC v2
audio codec, which has a more efficient transmission method.
stable reception compared to analog signals. The unit can also receive DAB+ (an
upgraded version of DAB) that allows for more stations using MPEG-4 HE-AAC v2
audio codec, which has a more efficient transmission method.
Note
▪ The unit supports Band III (174 to 240 MHz) only.
▪ Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list
▪ Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list
of nationwide DAB statuses and worldwide DAB frequencies, check WorldDMB online at
http://www.worlddab.org/.
http://www.worlddab.org/.
Preparing the DAB tuning
Before tuning into DAB radio stations, follow the procedure below to perform an initial
scan.
scan.
1
Press DAB to select the DAB band.
The following message appears on the front panel if you have not
performed an initial scan yet.
ENHANCER
LINK
ECO
MASTER
OUT
2
-Res
Hi
YPAO VOL. A - DRC
SLEEP
PARTY
ZONE
3 B
2 A
MUTE VIRTUAL
SBL
SB
SBR
FPR
FPL
SL
SW
SR
STEREO TUNED
VOL.
Press [ENTER]
2
Press ENTER to start an initial scan.
ENHANCER
LINK
ECO
MASTER
OUT
2
-Res
Hi
YPAO VOL. A - DRC
SLEEP
PARTY
ZONE
3 B
2 A
MUTE VIRTUAL
SBL
SB
SBR
FPR
FPL
SL
SW
SR
STEREO TUNED
VOL.
>>>------- 30%
When the initial scan finishes, the unit automatically tunes into the first
DAB radio station as stored in station order.
ENHANCER
LINK
ECO
MASTER
OUT
2
-Res
Hi
YPAO VOL. A - DRC
SLEEP
PARTY
ZONE
3 B
2 A
MUTE VIRTUAL
SBL
SB
SBR
FPR
FPL
STEREO TUNED
VOL.
SL
SW
SR
BBC Radio 4
Note
▪ If no DAB radio stations are found by an initial scan, the message in Step 1 appears again.
Press ENTER to start an initial scan again.
▪ You can check reception strength of each DAB channel label (p.64).
▪ To perform an initial scan again after some DAB radio stations are stored, select “Init Scan”
▪ To perform an initial scan again after some DAB radio stations are stored, select “Init Scan”
(p.87) in the “Option” menu. If you perform an initial scan again, the DAB radio stations
currently registered to the preset numbers will be cleared.
currently registered to the preset numbers will be cleared.
En
60