Yamaha AVENTAGE RX-A670 Owner's Manual
Enjoying audio using Bluetooth® speakers/
headphones
Follow the procedure below to establish a Bluetooth connection between Bluetooth
speakers/headphones and the unit.
speakers/headphones and the unit.
1
Use the input selection keys on the remote control to select an
input source.
Select an input source other than Bluetooth.
2
Press SETUP.
3
Use the cursor keys to select “Bluetooth” and press ENTER.
4
Use the cursor keys to set “Bluetooth” to “On”, and then set
“Transmitter” to “On” in the same way.
5
Use the cursor keys to select “Device Search” to search the
Bluetooth devices.
The list of Bluetooth devices is displayed.
6
Select the Bluetooth speakers/headphones to be connected with
the unit and press ENTER.
the unit and press ENTER.
When the connection process finishes, audio played back on the unit will
be reproduced from the Bluetooth speakers/headphones.
Note
▪ If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing
mode and then select “Device Search”.
▪ Follow one of the procedures below to terminate the Bluetooth connection.
– Perform the disconnect operation on the Bluetooth speakers/headphones.
– Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and
– Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and
then "Off".
En
70