Yamaha AVENTAGE RX-A670 Owner's Manual
Playing back more high-quality sounds with bi-amp connections
Using the four internal amplifiers for front speakers allows you to have more high-
quality sounds.
For example, you can use 2-way bi-amp speakers with a woofer and tweeter for front
speakers. It produces expansive sound in a bi-amp system featuring a woofer and
tweeter. By directly driving each speaker individually, it produces powerful sound
while maintaining the feeling of a high S/N ratio.
quality sounds.
For example, you can use 2-way bi-amp speakers with a woofer and tweeter for front
speakers. It produces expansive sound in a bi-amp system featuring a woofer and
tweeter. By directly driving each speaker individually, it produces powerful sound
while maintaining the feeling of a high S/N ratio.
Note
When using the four internal amplifiers in bi-amp system, the unit supports only 2- to 5.1-channel speaker
system.
system.
Connecting front speakers that support bi-amp
connections
When using front speakers that support bi-amp connections, connect them to the
FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals.
To enable the bi-amp function, set “Power Amp Assign” (p.94) in the “Setup” menu
to “BI-AMP” after connecting the power cable to an AC wall outlet.
FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals.
To enable the bi-amp function, set “Power Amp Assign” (p.94) in the “Setup” menu
to “BI-AMP” after connecting the power cable to an AC wall outlet.
1
2
3
4
5
9
OPTICAL
COAXIAL
COAXIAL
VIDEO
VIDEO
VIDEO
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR OUT
PRE OUT
SUBWOOFER
(BD/DVD)
2
3
1
4
ARC
NETWORK
(NET)
FRONT
CENTER
SPEAKERS
SURROUND
SINGLE
AV 3
AUDIO 1
AUDI0 2
AUDI0 3
AV 2
AV 1
(TV)
1
2
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
The unit (rear)
Note
▪ Surround back speakers, presence speakers, bi-amp speakers or Zone B speakers cannot be connected
simultaneously.
▪ The FRONT terminals and SURROUND BACK/PRESENCE/BI-AMP/ZONE B terminals output the same
signals.
Notice
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
En
81