Sony STR-ZA810ES Owner's Manual
26
US
ˎ
Some files may not play depending on the file format, the file encoding,
the recording condition, or the home network server condition.
the recording condition, or the home network server condition.
ˎ
Some files edited on a PC may not play.
ˎ
Fast forward or fast reverse may not be available with some files.
ˎ
The receiver does not play coded files such as DRM.
ˎ
The receiver can recognize the following files or folders in USB devices:
ē up to folders in the 9th layer (including the root folder)
ē up to 500 files/folders in a single layer
ē up to folders in the 9th layer (including the root folder)
ē up to 500 files/folders in a single layer
ˎ
The receiver can recognize the following files or folders stored in the
home network server:
ē up to folders in the 19th layer
ē up to 999 files/folders in a single layer
home network server:
ē up to folders in the 19th layer
ē up to 999 files/folders in a single layer
ˎ
Some USB devices may not work with this receiver.
ˎ
The receiver can recognize Mass Storage Class (MSC) devices (such as
flash drive or an HDD) and 101-key keyboards.
flash drive or an HDD) and 101-key keyboards.
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.1
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.5 (Audio Video Remote Control Profile)
AVRCP 1.5 (Audio Video Remote Control Profile)
Supported Codecs
3)
SBC
4)
, AAC, LDAC
Transmission range (A2DP)
20 Hz – 40,000 Hz (LDAC sampling frequency 96 kHz with 990 kbps
transmission)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
transmission)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
1)
The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, antenna’s
performance, operating system, software application, etc.
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, antenna’s
performance, operating system, software application, etc.
2)
BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices.
communication between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
General
Power requirements
120 V AC, 60 Hz
Power consumption
240 W
Standby mode: 0.5 W
(When [Control for HDMI], [Standby Through], [Remote Start],
[Bluetooth Standby], [Network Standby] and all zone power are set to
[Off].)
(When [Control for HDMI], [Standby Through], [Remote Start],
[Bluetooth Standby], [Network Standby] and all zone power are set to
[Off].)
Bluetooth Standby mode: 2.5 W
(When [Bluetooth Standby] is set to [On], and [Control for HDMI],
[Standby Through], [Remote Start], [Network Standby] and all zone
power are set to [Off].)
(When [Bluetooth Standby] is set to [On], and [Control for HDMI],
[Standby Through], [Remote Start], [Network Standby] and all zone
power are set to [Off].)
Dimensions (Approx.)
430 mm × 156 mm × 331 mm (17 in × 6
1
/
4
in × 13
1
/
8
in) (width/height/
depth) including projecting parts and controls
Mass (Approx.)
9.1 kg (20 lb 1 oz)
Supplied accessories
Operating Instructions (this manual)
Startup Guide (1)
Calibration microphone (1)
FM wire antenna (aerial) (1)
AC power cord (mains lead) (1)
Remote control (1)
R03 (size AAA) batteries (2)
Startup Guide (1)
Calibration microphone (1)
FM wire antenna (aerial) (1)
AC power cord (mains lead) (1)
Remote control (1)
R03 (size AAA) batteries (2)
Design and specifications are subject to change without notice.
Notes