Marantz NR1608 Owner's Manual

0 When setting this to “Enhanced”, we recommend using a “Premium High

Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that

has an “HDMI Premium Certified Cable” label attached to the product

package.

0 When this setting is “Enhanced”, configure the television or playback device

settings to match this setting.

0 When this setting is “Enhanced”, video may not be output correctly depending

on the connected playback device or HDMI cable. In this case, change this

setting to “Standard”.

0 “Custom” is displayed for the setting item if our service engineers or custom

installers has configured the HDMI signal format for this unit.

0 “4K Signal Format” can also be set by the following procedure. However, the

menu screen is not displayed. Watch the display while configuring the setting.

1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same

time for at least 3 seconds.
“V.Format:<NTSC>” appears on the display.

2. Press the main unit's DIMMER.

“4K :<Standard>” appears on the display.

3. Use the main unit's ZONE2 SOURCE or INTERNET RADIO and select the

4K Signal Format.

4. Press the main unit’s STATUS to complete the setting.

Set the video signal format to be output for the TV you are using.

o

(Default):

Select NTSC output.

Select PAL output.

0 “Format” can also be set by the following procedure. However, the menu

screen is not displayed. Following the display content to make the setting.

1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same

time for at least 3 seconds.
“V.Format:<NTSC>” appears on the display.

2. Use the main unit’s ZONE2 SOURCE or INTERNET RADIO and set the

video signal format.

3. Press the main unit’s STATUS to complete the setting.

0 When a format other than the video format of the connected TV is set, the

picture will not be displayed properly.

167