Marantz SR5012 Owner's Manual

Makes settings for video output.

0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.

0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler”

is set to anything other than “Off”. (“Resolution” (v p. 167), “Progressive

0 “Output Settings” cannot be set when 4K signals are input.
0 “Video Conversion”, “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect

o

Select the HDMI monitor connector to be used.

(Default):

The presence of a TV connected to the

HDMI MONITOR 1 or HDMI MONITOR 2

connector is detected automatically, and

that TV connection is used.

A TV connected to the HDMI MONITOR

1 connector is always used.

A TV connected to the HDMI MONITOR

2 connector is always used.

0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are

connected and “Resolution” is set to “Auto”, the signals are output with a

resolution that is compatible with both TVs.  (v p. 167)

When the “Resolution” setting in the menu is not set to “Auto”, set the

resolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that is

compatible with both TVs.  (v p. 214)

0 You can check which resolutions are compatible with your TV in “HDMI

Monitor 1” and “HDMI Monitor 2”.  (v p. 214)

0 When connecting multiple Dolby Vision TVs, the signal will only be optimal for

one TV. A TV connected to the HDMI MONITOR 1 connector has priority.

165