Marantz SR6011 Owner's Manual

Set the video signal format to be output for the TV you are using.

o

(Default):

Select NTSC output.

Select PAL output.

0 “Format” can also be set by the following procedure. However, the menu

screen is not displayed. Following the display content to make the setting.

1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same

time for at least 3 seconds.
“Video Format <NTSC>” appears on the display.

2. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and

set the video signal format.

3. Press the main unit’s STATUS to complete the setting.

0 When a format other than the video format of the connected TV is set, the

picture will not be displayed properly.

198