Marantz SR6011 Owner's Manual

Set the audio input mode of each input source.
The input modes available for selection may vary depending on the input

source.

0 “Input Select” settings are stored for each input source.

o

Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to “Auto”.

(Default):

Automatically detect input signal and

perform playback.

Play only signals from HDMI input.

Play only signals from digital audio input.

Play only signals from analog audio input.

Only signals input from the 7.1CH IN

connector will be played back.

0 If “HDMI Control” is set to “On” and a TV compatible with the ARC is

connected via the HDMI MONITOR connectors, the input mode whose input

source is “TV Audio” is fixed to ARC.

0 The sound mode cannot be set if the input mode is set to “7.1CH IN”.

203