Marantz SR6011 Owner's Manual

Set subwoofer and LFE signal range playback.

o

Select low range signals to be reproduced by subwoofer.

(Default):

The low range signal of the channel set to

“Small” speaker size is added to the LFE

signal output from the subwoofer.

The low range signal of all channels is

added to the LFE signal output from the

subwoofer.

0

“Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” in the

0 Play music or a movie source and select the mode offering the strongest bass.
0

If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer

Mode” is set to “LFE”, no sound may be output from the subwoofers,

Select “LFE+Main” if you want the bass signals to always be produced from

the subwoofer.

o

Set LFE signal playback range. Set this when you want to change the

playback frequency (low pass filter point) of the subwoofer.

80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz

(Default : 120 Hz)

228