Yamaha AVENTAGE RX-A1070 Owner's Manual
En
155
Bluetooth
Problem
Cause
Remedy
A Bluetooth connection cannot be established.
The Bluetooth function of the unit is disabled.
Enable the Bluetooth function (p.133).
Another Bluetooth device is already connected to the unit.
Terminate the current Bluetooth connection and then establish a new connection (p.80).
The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
The Bluetooth device does not support A2DP.
Use a Bluetooth device that supports A2DP.
The connection information registered on the Bluetooth device is not
working for some reason.
working for some reason.
Delete the connection information on the Bluetooth device, and then establish a
connection between the Bluetooth device and the unit again (p.80).
connection between the Bluetooth device and the unit again (p.80).
No sound is produced, or the sound is interrupted
during playback.
during playback.
The volume of the Bluetooth device is set too low.
Turn up the volume of the Bluetooth device.
The Bluetooth device is not set to send audio signals to the unit.
Switch the audio output of the Bluetooth device to the unit.
The Bluetooth connection has been terminated.
Establish a Bluetooth connection between the Bluetooth device and the unit again
(p.80).
(p.80).
The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.