Yamaha AVENTAGE RX-A1070 Owner's Manual

En

Preparing Zone2

Connect the device that will be used in Zone2 to the unit.

■

Connecting speakers to play back audio

Connect speakers to play back audio in Zone2. The connection method varies depending on 

the amplifier being used (the unit or an external amplifier).

Using the unit’s internal amplifier

Connect the speakers placed in Zone2 to the unit with speaker cables. For details, see 

“Connecting Zone2 speakers” (p.30).

Using an external amplifier

Connect the external amplifier placed in Zone2 to the unit with a stereo pin cable and connect 

speakers to the external amplifier.

X

set “Volume” (p.135) in the “Setup” menu to “Fixed”.

• Remove the unit’s power cable from the AC wall outlet before connecting speakers or an external 

amplifier.

• Ensure that the bare wires of the speaker cable do not touch one another or come into contact with 

the unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short 
circuit, “Check SP Wires” will appear on the front display when the unit is turned on.

L

R

L

R