Yamaha AVENTAGE RX-A2070 Owner's Manual
En
125
■
Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB, 0.5 dB increments
Y
• When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
• If you set an extreme value, sounds may not match those from other channels.
X
You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE CONTROL
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
■
YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
sounds even at low volume.
Settings
X
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved (p.54).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when
the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low
volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high
volume.
Input Settings
(Input Settings)
(Input Settings)
Input Trim
(In.Trim)
(In.Trim)
Corrects volume differences between input sources.
Audio Select
(A.Sel)
(A.Sel)
Selects the audio input jack to use when more than one
audio connection is made for one input source.
audio connection is made for one input source.
Video Out
(V.Out)
(V.Out)
Selects a video to be output with the audio input source.
FM Mode
(FM Mode)
(FM Mode)
Switches between stereo and monaural for FM radio
reception.
reception.
Init Scan
(Init Scan)
(Init Scan)
(Australia, U.K., Europe and Russia models only)
Performs an initial scan for DAB radio reception.
Tune AID
(Tune AID)
(Tune AID)
(Australia, U.K., Europe and Russia models only)
Checks reception strength of each DAB channel label.
Shuffle
(Shuffle)
(Shuffle)
-
Repeat
(Repeat)
(Repeat)
-
Item
Function
Page
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is enabled.
Volume: low
Volume: high
Input level
Input level
On
Off
On
Off
Ou
tp
u
t l
e
vel
Ou
tp
u
t le
vel