Yamaha AVENTAGE RX-A2070 Owner's Manual

En

Press RECEIVER z to turn on 
the unit.

The Network Setup screen shown below will be 
displayed on the TV when the unit is turned on for 
the first time after purchase. It may take several 
tens of seconds for the screen to be displayed 
(WAC:  Wireless Accessory Configuration).

See “Sharing the iOS device setting” under 
“Connecting the unit to a wireless network” in the 
Owner’s Manual when using this function to 
connect the unit to a network.
This document explains wireless connection 
using methods other than this function. Follow 
the procedure described under “Connecting the 
unit to a network” on the next page.

This screen will not be displayed if the unit is connected 
to a router via its NETWORK jack (wired connection).

Before connecting the power cable 
(Taiwan, Brazil and General models only)
Set the switch position of VOLTAGE 
SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 
50/60 Hz.

To an AC

wall outlet

VOLTAGE SELECTOR
(Taiwan, Brazil and General models only)

z