Yamaha AVENTAGE RX-A3070 Owner's Manual

Page of 232
En
126
Dialogue (Dialog)
Adjusts the volume or perceive height of dialogue sounds.
Dialogue Level (Dialog Lvl)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you can 
turn up its volume by increasing this setting.
Setting range
0 to 3
X
This setting is not available when DTS:X content is played back, or when the Dolby Surround or Neural:X decoder 
is working.
DTS Dialogue Control (DTS Dialog)
Adjusts the volume of dialogue sounds for DTS:X contents.
Setting range
0 to 6
X
This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played back.
Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming from 
below the TV screen, you can raise its perceived height by increasing this setting.
X
This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 9ch Stereo) is selected when front presence speakers are 
used.
– Virtual Presence Speaker (VPS) (p.79) is working. 
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
Lipsync Adjustment (Lipsync Adj.)
Adjusts the delay between video and audio output.
Setting range
0 ms to 500 ms (1 ms increments)
X
This setting is available only when “Delay Enable” (p.147) in the “Setup” menu is set to “Enable” (default).
Subwoofer/Bass (Subwoofer/Bass)
Adjust the subwoofer volume or bass sound.
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Extra Bass (Extra Bass)
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass 
sounds, regardless of the size of the front speakers and the presence or absence of the 
subwoofer.
Settings
Ideal position
Off (Off)
Disables Extra Bass.
On (On)
Enables Extra Bass.