Manualsbrain.com
  1. Manuals
  2. Brands
  3. Yamaha
  4. AVENTAGE RX-A3070
  5. Owner's Manual

Yamaha AVENTAGE RX-A3070 Owner's Manual

Download
Page of 232
En
149
■
DAC Digital Filter
(RX-A3070 only)
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have favorite 
sounds.
Settings
■
Object Decode Mode
Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X 
contents.
Settings
X
If audio output is not available when Dolby Atmos or DTS:X signals are input, set “Object Decode Mode” to 
“Enable”.
Video
Configures the video output settings.
■
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
X
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce 
video output delay.
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
X
If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.165) in the 
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV 
normally.)
Sharp Roll-off Type
Removes out-of-band noises by the filter with steep attenuation characteristics.
It has a tendency to produce clear sounds.
Slow Roll-off Type
Removes out-of-band noises by the filter with gentle attenuation characteristics.
It has a tendency to produce soft sounds.
Short Latency Type
Reduces the audio delay caused by the DAC internal digital filter.
It has a tendency to produce responsive and rhythmical sounds.
Disable
Disables playback of object-based audio signals. Those signals will be played in 
normal 5.1-/7.1-channel audio.
Enable
Enables playback of object-based audio signals.
Direct
Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
Through
Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p, 
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)