Yamaha MusicCast WX-010 Owner's Manual

You can use two WX-010 units to reproduce stereo sound by setting each speaker as the right 
or left speaker. 
Set the left and right speakers separately by following the steps below.

A

If the WX-010 is linked to another MusicCast unit, first disconnect the link by using the dedicated app “MusicCast 
CONTROLLER.”

B

C

1 For setting the left speaker: 

 and 

Indicators light from right to left repeatedly (refer to 

 of the table), and the unit enters pairing standby.

2 For setting the right speaker: 

 and 

Indicators light from left to right repeatedly (refer to 

 of the table), and the units start pairing.

After paring is completed, the indicators light from the center to both sides (refer to 

 of the table), and all indicators 

return to the normal status.

D

y

• You can check which speaker is the left or right speaker with the dedicated app “MusicCast CONTROLLER” (Indicators 

light as

 

 or

 

 of the table).

• In Stereo Pair mode, you can operate one speaker to simultaneously turn off both speakers or adjust the volume of both 

speakers.

• If about five minutes passes while the unit cannot find the other speaker to connect to, the pairing standby will be cancelled 

automatically.

• When in Stereo Pair mode, the option settings other than “Initialize the unit.” (

☞  P.16) cannot be set.

The Stereo Pair setting remains even if the speakers enter standby or the power cable is unplugged and plugged again.

• To use the Stereo Pair function, you need two 

WX-010.

• Stereo Pair is available only when the Network 

Standby of the unit is enabled (

Start Pairing/
Checking the 
Left and Right 
Speaker

Pairing 
Completed