Yamaha MusicCast WX-030 Owner's Manual

© 2015 Yamaha Corporation

Printed in China   ZT49720

You can use two WX-030 to reproduce stereo sound by setting each speaker as a right or left 
speaker. Set the left and right speakers separately by following the steps below.

• To use the Stereo Pair function, you need two WX-030. 
• Before setting the Stereo Pair, update the dedicated app 

“MusicCast CONTROLLER” and the firmware of both units 
to the latest version (refer to the owner’s manual).

• Stereo Pair function does not support AirPlay.
• Stereo Pair is available only when the Network Standby 

mode of the unit is enabled.

A

When the WX-030 is linked to other MusicCast unit, 
cancel the link by using the dedicated app “MusicCast 
CONTROLLER”.

B

C

1 For setting the left speaker: 

Indicators light from right to left repeatedly (refer to 

 of the table on the right), and the unit enters pairing 

standby mode.

2 For setting the right speaker: 

Indicators light from left to right repeatedly (refer to 

 of the table on the right), and the units start pairing.

After paring is completed, the indicators light from the 
center to both sides (refer to 

 of the table on the right), 

and all indicators return to the normal status.

D

y

• You can check which speaker is the left or right speaker with 

the dedicated app “MusicCast CONTROLLER” (Indicators 
light as 

 or 

 of the table on the right).

• In Stereo Pair mode, you can operate one speaker to 

simultaneously turn off both speakers or adjust the volume 
of both speakers.

The Stereo Pair setting remains even if the speakers enter 
standby mode or the power cable is unplugged and plugged 
again.

speaker together for 3 seconds.
Indicators light from both sides to the center (refer to 

 of the table on the bottom) and Stereo Pair will be 

canceled.

• The Stereo Pair can be canceled only during standby mode.
• If you cancel Stereo Pair with one of the two speakers, the 

other one will be canceled automatically.

• If one of the two speakers is disconnected from the network 

when canceling the Stereo Pair, cancel Stereo Pair on each 
speaker.

Start Pairing/
Checking the 
Left and Right 
Speaker

Pairing 
Completed

Canceling 
Stereo Pair