Denon HEOS 1+ HEOS 5 Bundle Owner's Manual

Playing music from the AUX input

Connect an audio device with a 3.5 mm stereo audio

output to the AUX input on your speaker using the

included 3.5 mm stereo audio cable.

When a stereo audio cable is connected to AUX IN, the source

automatically switches to Inputs.

NOTE

0 When there is a cable connected to AUX IN, select “Inputs” from the “Music”

tab.

Initiate playback on the audio device.

0 The sound from the audio device can be played directly on the selected speaker or

digitized and sent over your network to other speakers.

NOTE

0 The analog output signals from some sources can be fairly strong. If the input level

of the source device is turned up high, it could overload the inputs of the HEOS

device.

This is unlikely to cause damage, but can cause distorted sound. Initially, set the

volume of the source to a medium – low level, then turn it up as needed. If you hear

distortion, turn down the device's volume control.

Audio signal

Use