Yamaha WXA-50 Owner's Manual

Page of 77
16
En
EN
Advanced operation
The unit is equipped with many other functions such as tone adjustment. For more 
information about operating the unit, refer to the Owner’s Manual (Advanced), which 
can be downloaded from the Yamaha website:
1.  Access the Yamaha website (http://download.yamaha.com/) with a web browser.
2. Select your country or region.
3. Type WXA-50 or WXC-50 (model name) in the blank of “Search by Model Name”.
4. Click “Search” button.
5. Download the Owner’s Manual displayed on “Search Results”.
Bluetooth
Problem
Cause
Remedy
Cannot make the unit pair with 
a Bluetooth device.
The Bluetooth device does not support 
A2DP.
Use a Bluetooth device that supports A2DP.
The unit and the Bluetooth device are too 
far apart.
Move the Bluetooth device closer to the unit.
The unit enters Standby mode.
Turn on the unit and select Bluetooth as the input 
source, and then perform pairing with the device.
Another Bluetooth device is already 
connected to the unit.
Terminate the current Bluetooth connection and 
then establish a new connection.
Error table of STATUS indicator (front panel)
Color
Condition
Blink
Status of the unit
Red
Flashing, and the power 
turns off immediately 
after the power has 
been turned on
2 - 8 times
As a safety precaution, the unit turned itself off.
Flashing, and the power 
does not turn on
4 - 8 times
As a safety precaution, capability to turn on the 
power is disabled. Contact your nearest authorized 
Yamaha dealer or service center to request repair.
Flashing (every 0.5 
second)
Repeat blinking 2 - 7 
times and 1 second off 
until the unit is turned off
An error occurred during firmware updating. For more 
information about updating the firmware, refer to the 
Owner’s Manual (Advanced) that can be downloaded 
from the Yamaha website.
Slow flashing (every 1 
second)
Twice
An error is occurring with the USB device.
3 times
An error is occurring with the network.
5 times
An error is occurring with WAC/WPS/CONNECT.
Repeated until the unit is 
turned off
Firmware update failed. Update the firmware again. 
For more information about updating the firmware, 
refer to the Owner’s Manual (Advanced) that can be 
downloaded from the Yamaha website.
Orange
Flashing
Twice
The remote control IDs of the unit and the remote 
control are not identical, or reception of the remote 
control signal is disabled. For more information 
about setting the remote control, refer to the Owner’s 
Manual (Advanced) that can be downloaded from the 
Yamaha website.
White
Slow flashing after 
turning on the power
10 times
A new firmware update is available. For more 
information about updating the firmware, refer to the 
Owner’s Manual (Advanced) that can be downloaded 
from the Yamaha website.