Yamaha R-N303 Owner's Manual

DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog 
signals. This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4 
audio codec (AAC+), which has a more efficient transmission method.

This unit supports Band III (174 to 240 MHz) only.

Before tuning in to DAB stations, an initial scan must be 
performed. When you select the DAB for the first time, 
the initial scan is performed automatically.
To listen to a DAB station, connect the antenna as 
described in “Connecting the DAB/FM antenna (R-
N303D)” (p. 12). 

Press BAND to select the DAB band.
The initial scan starts. During the scan, the progress is 
displayed on the front panel display.
When the scan is complete, the top of the list of the 
scanned stations appears on the front panel display.

• If no DAB radio stations are found by an initial scan, 

“Not Found” will appear on the front panel display, 
followed by “Off Air”. Press BAND twice to re-select the 
DAB band and scan again.

• You can check reception strength of each DAB channel 

• To perform an initial scan again after some DAB radio 

stations are stored, select “Initiate Scan” (p. 37) in the 
“OPTION” menu. If you perform an initial scan again, the 
DAB radio stations currently registered to the preset 
numbers will be cleared.

You can select a DAB radio station from the stations 
stored by the initial scan.

Press TUNING jj / ii  to select a DAB radio 
station.

• “Off Air” appears when the selected DAB radio station is 

currently not available.

• When the unit is receiving a secondary station, “2” appears next 

to “DAB”.

jj / ii 

BBC Radio 4

DAB