Yamaha YSP-2700 Digital Sound Projector Owner's Manual

SETTINGS

➤ Setup menu

En

Use to configure the settings related to HDMI signals and the HDMI control function.

Turn HDMI control (p. 37) on or off.

• Set the HDMI control function to “On” when a TV that supports audio return channel (ARC) is used (p. 24), 

or when using the HDMI signal pass-through function (p. 25).

Use to select a device to play back HDMI audio signals.

• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the 

TV connected to this unit.

• HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT 

(ARC) jack of this unit.

If your TV is not ARC compatible (or if the ARC feature has been disabled), TV audio is 
input via the TV (optical digital) input jack (default). This unit’s input source can be 
changed to the AUX2 (coaxial digital) input jack or AUX1 (analog) input jacks.

Optical [TV] (default), Analog [AUX1], Coaxial [AUX2]

• If this unit’s input source is switched to “Coaxial [AUX2]”:

Audio is input from the device (TV) connected to the AUX2 (coaxial digital) input jack on this unit when the 
TV key is pressed. Audio is input from the device connected to the TV (optical digital) input jack on this unit 
when the AUX2 key is pressed.

• If this unit’s input source is switched to “Analog [AUX1]”:

Audio is input from the device (TV) connected to the AUX1 (analog) input jacks on this unit when the TV key 
is pressed. Audio is input from the device connected to the TV (optical digital) input jack on this unit when 
the AUX1 key is pressed.

➜

➜

Off

Disable the control function. The standby power consumption of this unit 
decreases.

On (default)

Enable the control function.

➜

➜

AMP (default)

Play HDMI audio input signal from the unit.

TV

Play HDMI audio input signal from the TV connected to the HDMI OUT (ARC) 
jack on the unit.

➜

➜