Yamaha YSP-2700 Digital Sound Projector Owner's Manual
APPENDIX
➤ Troubleshooting
En
99
Remote control
Transmitting
Cannot make the
unit connected
to the Bluetooth
device.
unit connected
to the Bluetooth
device.
“Bluetooth” is set to “Off”.
Set it to “On”.
“Transmission” is set to “Off”.
Set it to “On”.
Another Bluetooth device is connected.
Terminate the current Bluetooth connection, and connect to the device to
which audio should be transmitted.
which audio should be transmitted.
The device does not support A2DP.
Connect to a Bluetooth audio device that supports A2DP.
The unit and device are too far apart.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
and connect the device to this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
–
No sound is
heard or the
sound is
intermittent via
the Bluetooth
device.
heard or the
sound is
intermittent via
the Bluetooth
device.
The device is not set to receive Bluetooth audio signals from the unit.
Check that the Bluetooth function of the device is set properly.
–
The device’s volume is set to minimum.
Turn up the volume level on the device.
–
The sound to be transmitted is not playing.
Play audio on the device selected with the input selector key.
The unit and device are too far apart.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
–
The Bluetooth connection of the unit with the device is disconnected.
Perform Bluetooth connection operations again.
Attempted to establish a connection during playback with AirPlay.
Playback with AirPlay cannot be transmitted. Terminate AirPlay playback
and try again to establish a connection.
and try again to establish a connection.
Problem
Cause
Remedy
See page
The remote control does not work
and/or function properly.
and/or function properly.
The wrong distance or angle.
The remote control functions within a maximum range of 6 m (20 ft) and no
more than 30 degrees off-axis from the front panel.
more than 30 degrees off-axis from the front panel.
Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this unit.
striking the remote control sensor of this unit.
Reposition this unit.
–
The batteries are weak.
Replace all batteries.
Problem
Cause
Remedy
See page