Yamaha YSP-5600 Digital Sound Projector Owner's Manual

En

c Auto setup for appropriate surround effects (IntelliBeam)

First use the “IntelliBeam” function to adjust each channel so that this unit provides the 
optimal viewing and listening environment.

• The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms 

described in “Unrecommended listening environments” (p. 9).
The My Surround function can be used to enjoy rich surround sound in these types of rooms as well. See 
“Channel Out” (page 72 in the Owner’s Manual) for more information.

• Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate 

sound optimization.

❑

• Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam 

microphone at the same height as your ears would be when you are seated.

• Position the IntelliBeam microphone so that it is parallel with the floor.

Make sure that there are no obstacles between the IntelliBeam microphone and the 
walls in your listening room as these objects obstruct the path of sound beams.

However, any objects that are in contact with the walls will be regarded as a protruding 
part of the walls.

c

Remove

Fit in

Run through

Place horizontally

Fit in

IntelliBeam microphone

Upper limit

Within 1 m

Center height of 

this unit

Cardboard

microphone stand

Within 1 m

Listening position

1.8 m or more

Lower limit

Center line

IntelliBeam microphone

Cardboard microphone stand