Yamaha YSP-5600 Digital Sound Projector Owner's Manual

PLAYBACK

➤ Wireless playback of audio via Bluetooth connection

En

Listening to music from a Bluetooth device (Receiving)

Bluetooth is selected as an input source, and 
“BLUETOOTH” is shown in the front panel display.

• If a Bluetooth device has been connected before, the unit will connect to the 

last connected device when the 

 key is pressed. Terminate this 

connection to connect a new device.

• If you are unable to select Bluetooth as an input source, be sure that 

“Transmission” in the setup menu is set to “Off” (p. 82)

Turn on the Bluetooth function on the Bluetooth 
device.

The operation varies depending on the device. Refer to 
documentation supplied with the device.

Select “YSP-5600” in the Bluetooth device list on 
the device.

If a passkey (PIN) is required, enter the number “0000”.

The 

 indicator in the front panel display flashes while the 

unit and Bluetooth device are being connected, and glows 
steadily when the connection is established.

“Connect” is shown in the front panel display.

The 

 indicator or a completion message is displayed on 

the Bluetooth device.

Play back a song on the Bluetooth device.

• With some Bluetooth devices, this unit must be specified as the destination for 

audio output.

• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned 

on and off with Bluetooth device operations (p. 81).

B L U E T O O T H

YSP-5600

PIN   0 0 0 0

1

2

3

4

5

6

7

8

9

0

Flashes while 

processing a 

connection

Glows when the 

connection is 

established