Yamaha YSP-5600 Digital Sound Projector Owner's Manual

SETTINGS

➤ Setup menu

En

Use to configure the settings related to HDMI signals and the HDMI control function.

Turn HDMI control (p. 34) on or off.

Use to select a device to play back HDMI audio signals.

• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the 

TV connected to this unit.

• HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT 

(ARC) jack of this unit.

If your TV is not ARC compatible (or if the ARC feature has been disabled), TV audio is 
input via the TV (digital optical) jack (default). This unit’s input source can be changed 
to the AUX2 (digital coaxial) jack or AUX1 (analog) jack.

Optical [TV] (default), Analog [AUX1], Coaxial [AUX2]

• If this unit’s input source is switched to “Coaxial [AUX2]”:

Audio is input from the device (TV) connected to the AUX2 (digital coaxial) jack on this unit when the TV 
key is pressed. Audio is input from the device connected to the TV (digital optical) jack on this unit when the 
AUX2 key is pressed.

• If this unit’s input source is switched to “Analog [AUX1]”:

Audio is input from the device (TV) connected to the AUX1 (analog) jack on this unit when the TV key is 
pressed. Audio is input from the device connected to the TV (digital optical) jack on this unit when the AUX1 
key is pressed.

➜

➜

Off (default)

Disable the control function. The standby power consumption of this unit 
decreases.

On

Enable the control function.

➜

➜

AMP (default)

Play back the input sound signal.

TV

Plays audio content from the TV connected to the HDMI OUT (ARC) jack.

➜

➜