Yamaha YSP-5600 Digital Sound Projector Owner's Manual

SETTINGS

➤ Updating the unit’s firmware

En

New firmware that provides additional features or product 
improvements will be released as needed. If the unit is connected 
to the Internet, you can download the firmware via the network and 
update it.

When the unit is turned on for the first time after a new version of the 
unit’s firmware has been released, a message indicating that a 
firmware update is available will be displayed on the TV screen, 
and an envelope icon (

) will be displayed in the setup menu 

The unit’s firmware can be updated as follows.

• Update firmware from “Network Update” in the setup menu.

• Update firmware by connecting a USB flash drive to which the 

unit’s firmware update has been saved (p. 88).

• Update firmware using the dedicated MusicCast CONTROLLER 

app installed on a mobile device. Follow MusicCast 
CONTROLLER guides to operate the app and update the 
firmware.

The setup menu is displayed on the TV screen.

S/T keys to select “Network”, and then 

S/T keys to select “Network Update”, and 

The following screen is displayed when firmware updates 
are available.

• To cancel the operation without updating the firmware, press the SETUP 

(

)  key.

• Do not operate the unit or disconnect the power cable or network cable during 

firmware update. Firmware update takes about 20 minutes or more (depending 
on your Internet connection speed).

• If the Internet connection speed is slow, or the unit is connected to the wireless 

network, network update may not be possible depending on the condition of 
the network connection. In this case, update the firmware using the USB flash 
drive (p. 88).

• To perform the following procedure, your TV must be connected to the unit via 

HDMI.

• For details on update, visit the Yamaha website.

/
ENTER
SETUP (    )