Sony STR-DH770 Owner's Manual

28

GB

D:\NORM'S JOB\SONY HA\SO160004\STR-DH770 (PMRF 04)\4584079132_GB\030CON.fm

STR-DH770

4-584-079-13(2)

Setting up the Receiver 
using the Easy Setup

To perform initial setup of the receiver, make 
sure a TV is connected to the receiver (page 
22, 23). Then, switch the input of the TV to the 
input to which the receiver is connected.

It is not possible to perform the Easy Setup 
procedure using the indications on the display 
panel.

When you turn on the receiver for the first 
time or after the receiver is initialized, the 
Easy Setup screen appears on the TV screen.

If the Easy Setup screen does not appear or 
you want to display the Easy Setup screen 
manually, you can display it by pressing 
HOME, then select [Easy Setup].

By performing Easy Setup, you can complete:
1: Selecting the language
2: Selecting the Surround Back Speakers 

Assign
Set the assignment for the SPEAKERS 
SURROUND BACK/BI-AMP/FRONT HIGH/
FRONT B terminals.

3: Performing the Auto Calibration

Perform automatic calibration according to 
the configuration and arrangement of your 
speaker system.



Disconnect the headphones.



Remove any obstacles between the 
calibration microphone and the speakers.



For accurate measurement, make sure the 
environment is quiet and free from noise.



Set the speaker output to a setting other 
than “SPK OFF”. For details, see “Selecting 
the front speakers” (page 29).



Confirm the active subwoofer setup
 When a subwoofer is connected, turn on 

the subwoofer and turn up the volume 
prior to activating the subwoofer. Turn 
the LEVEL to just before the mid-point.

 If you connect a subwoofer with a 

crossover frequency function, set the 
value to maximum.

 If you connect a subwoofer with an auto 

standby function, set it to off 
(deactivated).

Depending on the characteristics of the 
subwoofer you are using, the setup distance value 
may be different from the actual position.

What you can do with Easy Setup