Sony STR-DH770 Owner's Manual
40
GB
D:\NORM'S JOB\SONY HA\SO160004\STR-DH770 (PMRF 04)\4584079132_GB\050ADD.fm
masterpage: Left
STR-DH770
4-584-079-13(2)
HDMI Video
Resolution
480p/60 Hz
576p/50 Hz
720p/60 Hz, 50 Hz, 24 Hz
1080i/60 Hz, 50 Hz
1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
Support
HDCP2.2, HDR, 3D, Deep Color (Deep
Colour), ITU-R BT.2020, ARC.
Colour), ITU-R BT.2020, ARC.
iPhone/iPod section
BLUETOOTH technology works with iPhone 6s
Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, and iPod touch (5th and
6th generation).
Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, and iPod touch (5th and
6th generation).
You can use “SongPal” app with this receiver via
BLUETOOTH.
BLUETOOTH.
iPhone/iPod playback via
(USB) port is not
possible.
USB section
Supported format*
MP3/WMA/AAC/WAV
* Compatibility with all encoding/writing software,
recording devices and recording media cannot be
guaranteed.
guaranteed.
Supported USB device
Mass Storage Class
Maximum current
1 A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.3 (Advanced Audio Distribution
Profile)
AVRCP 1.5 (Audio Video Remote Control
Profile)
SPP 1.2 (Serial Port Profile)
DID (Device Identification Profile)
Profile)
AVRCP 1.5 (Audio Video Remote Control
Profile)
SPP 1.2 (Serial Port Profile)
DID (Device Identification Profile)
Supported Codecs
3)
SBC
4)
, AAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
2)
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication between
devices.
purpose of BLUETOOTH communication between
devices.
3)
Codec: Audio signal compression and conversion
format
format
4)
Subband Codec
General
Power requirements
Power consumption
240 W
Power consumption (during standby mode)
0.3 W or less (When “CTRL HDMI” is set to
“CTRL OFF”, “STBY THRU” is set to “OFF”, and
“BT STANDBY” is set to “STBY OFF”.)
0.5 W (When “CTRL HDMI” is set to “CTRL
ON”, “BT STANDBY” is set to “STBY ON”, and
“STBY THRU” is set to “OFF”.)
“CTRL OFF”, “STBY THRU” is set to “OFF”, and
“BT STANDBY” is set to “STBY OFF”.)
0.5 W (When “CTRL HDMI” is set to “CTRL
ON”, “BT STANDBY” is set to “STBY ON”, and
“STBY THRU” is set to “OFF”.)
Dimensions (width/height/depth) (Approx.)
430 mm × 156 mm × 329.4 mm (17 in ×
6 1/4 in × 13 in) including projecting parts
and controls
6 1/4 in × 13 in) including projecting parts
and controls
Mass (Approx.)
7.8 kg (17 lb 4 oz)
Design and specifications are subject to change
without notice.
without notice.
Area
Power requirements
USA, Canada,
Taiwan
Taiwan
120 V AC, 60 Hz
Oceania
230 V AC, 50 Hz
Europe
230 V AC, 50/60 Hz