Netgear AC1200 Owner's Manual
Advanced Settings
86
R6100 WiFi Router
Note:
To avoid interference, NETGEAR recommends that you use different
wireless settings for each wireless router or gateway on the network. You could
also disable the wireless radio on the other router or gateway.
also disable the wireless radio on the other router or gateway.
5.
Click the Apply button.
The IP address of the router changes, and you are disconnected. To reconnect, close and
restart your web browser, and type http://www.routerlogin.net in the address field.
restart your web browser, and type http://www.routerlogin.net in the address field.
Wireless Distribution System
You can set the router up to be used as a wireless base station or a wireless repeater in a
wireless distribution system (WDS).
wireless distribution system (WDS).
Note:
To use the wireless repeating function, you need to select the None
radio button as the security option in the Wireless Settings screen,
and you cannot select Auto Channel.
radio button as the security option in the Wireless Settings screen,
and you cannot select Auto Channel.
A WDS lets you expand a wireless network through multiple access points. A wireless base
station connects to the Internet, can have wired and wireless clients, and sends its wireless
signal to an access point that functions as a wireless repeater. A wireless repeater can also
have wired and wireless clients, but connects to the Internet through the wireless base
station. The following figure shows a wireless repeating scenario.
signal to an access point that functions as a wireless repeater. A wireless repeater can also
have wired and wireless clients, but connects to the Internet through the wireless base
station. The following figure shows a wireless repeating scenario.
Repeater
Base station
access point
access point
Figure 8. Wireless repeating scenario