Netgear AC1200 Owner's Manual
Advanced Settings
92
R6100 WiFi Router
8.
Type the gateway IP address, which has to be on the same LAN segment as the router.
9.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
10.
Click the Apply button.
The static route is added.
To edit or delete a static route:
1.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes screen displays.
2.
In the table, select the radio button next to the route that you want to edit or delete.
3.
Do one of the following:
•
Click the Edit button.
The Static Routes screen adjusts.
a. Edit the route information.
b. Click the Apply button.
•
Click the Delete button.
The route is removed from the table.
Remote Management
The remote management feature lets you access your router over the Internet to view or
change its settings.
change its settings.
Note:
Be sure to change the router default password to a secure
password. The ideal password contains no dictionary words from
any language and contains uppercase and lowercase letters,
numbers, and symbols. It can be up to 30 characters. See
password. The ideal password contains no dictionary words from
any language and contains uppercase and lowercase letters,
numbers, and symbols. It can be up to 30 characters. See
78.