Netgear AC1900 Nighthawk™ Owner's Manual

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.

Select the Enable VLAN / Bridge group check box.

Select the By bridge group radio button.

Select a Wired Ports check box or a Wireless check box:

If your device is connected to an Ethernet port on the router, select a Wired Ports 
check box that corresponds to the Ethernet port on the router to which the device is 
connected.

If your device is connected to your router’s WiFi network, select a Wireless check 
box that corresponds to the router’s WiFi network to which the device is connected.

You must select at least one Wired Ports or Wireless check box. 
You can select more than one check box.

Click the Apply button.

Your settings are saved.

You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each 
VLAN tag group.

If you add a VLAN tag group to the bridge, packets sent between the device and the router’s 
Internet port are not processed through the router’s network address translation (NAT) or 
firewall.



Launch an Internet browser from a computer or wireless device that is connected to the 

network.

Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.