Netgear AC1900 Nighthawk™ Owner's Manual
Supplemental Information
108
Nighthawk AC1900
WiFi Cable
Modem
Router
Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the modem router for at least
seven seconds. The modem router resets, and returns to the factory configuration settings
shown in the following table.
similar object to press and hold the Reset button on the back of the modem router for at least
seven seconds. The modem router resets, and returns to the factory configuration settings
shown in the following table.
Table 2. Factory default settings
Feature
Default behavior
Modem router
login
login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Local network
(LAN)
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.0.2 to 192.168.0.254
Time zone
Pacific time
DHCP starting IP address
Configured by the Internet provider
DHCP ending IP address
192.168.0.254
DMZ
Disabled
Time zone
As per the ISP/MSO ToD (Time of Day) Configuration
Time zone adjusted for daylight
savings time
savings time
As per ISP/MSO ToD (time of Day) server configuration
SNMP
Enabled
Cable modem
Firewall
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Wireless
Wireless communication
Enabled
SSID name
See the product label
Security
WPA2-PSK (AES)
Broadcast SSID
Enabled