Netgear AC1900 Nighthawk™ Owner's Manual
Specify Network Settings
143
Nighthawk AC1900
Smart WiFi Router
9.
In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your router is the base station, it can function as the “parent” for up to four other access
points.
points.
10.
Click the Apply button.
Your changes are saved.
Set Up a Repeater
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
wireless connection to the base station.
If you are using the router as the base station with a non-NETGEAR router as the repeater,
you might need to change more configuration settings. In particular, disable the DHCP server
function on the access point that is the repeater.
you might need to change more configuration settings. In particular, disable the DHCP server
function on the access point that is the repeater.
To configure a NETGEAR router as a repeater:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network of the router to be the repeater.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless and verify that the wireless settings match the base unit exactly.
The wireless security option must be set to None.
5.
Select ADVANCED > Wireless Repeating Function.
6.
Select the Enable Wireless Repeating Function check box.