Netgear AC1900 Nighthawk™ Owner's Manual
Troubleshooting
186
Nighthawk AC1900
Smart WiFi Router
this range, check the connection from the computer to the router, and reboot your
computer.
computer.
•
If your router’s IP address was changed and you do not know the current IP address,
clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. For more information, see
clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. For more information, see
192.
•
Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.
Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.
•
Try quitting the browser and launching it again.
•
Make sure that you are using the correct login information. The user name is admin, and
the default password is password. Make sure that Caps Lock is off when you enter this
information.
the default password is password. Make sure that Caps Lock is off when you enter this
information.
•
If you are attempting to set up your NETGEAR behind an existing router in your network,
use bridge mode or set up the router as an access point.
use bridge mode or set up the router as an access point.
•
If you are attempting to set up your NETGEAR router as a replacement for an ADSL
gateway in your network, the router cannot perform many gateway services. For
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.
gateway in your network, the router cannot perform many gateway services. For
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.
Cannot Access the Internet
If you can access your router but not the Internet, check to see if the router can obtain an IP
address from your Internet service provider (ISP). Unless your ISP provides a fixed IP
address, your router requests an IP address from the ISP. You can determine whether the
request was successful using the Router Status page.
address from your Internet service provider (ISP). Unless your ISP provides a fixed IP
address, your router requests an IP address from the ISP. You can determine whether the
request was successful using the Router Status page.
To check the WAN IP address:
1.
Start your browser, and select an external site such as
2.
Access the router interface at www.routerlogin.net.
3.
Select Administration > Router Status.
4.
Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has
not obtained an IP address from your ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your cable or
DSL modem to recognize your new router by restarting your network. For more information,
see
DSL modem to recognize your new router by restarting your network. For more information,
see
183.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of
the following:
the following:
•
Your Internet service provider (ISP) might require a login program.
Ask your ISP whether they require PPP over Ethernet (PPPoE) or some other type of
login.
•
If your ISP requires a login, the login name and password might be set incorrectly.